Megan Janett OBDF 210 December 1, 2020 Milestone Projects Castle The purpose of this project is to create a castle using tools such as extrudeCrv, 2D shapes, loft and cap in Rhino. When creating the castle I wanted it to be quite symmetrical so what I put in one corner I would add to the rest. This castle is mainly made up of cylinders, cubes and hexagons that I would copy and move around my piece. One of my successes would be the flag on top. It took me a few tries using the control point curve tool to get it the shape that I wanted it to be. Surface Design Study The purpose of this project is to create a pattern and then add color to it in Rhino. After some planning and discussion I decided to add a couple of my designs together. I decided to make the boarder only have a pattern on two of the four side allowing for a grid like pattern to be seen. The main tool that I used to create this pattern was arraypolar, array and interpcrv. One of the mistakes I made was that...